|
BMW R1200GS / ADV 2008-2010 & HP2 Bar Riser 1.76 Inch Move
Like the styling of your R1200GS, but want a more relaxed riding position?
MV Verholen in Germany designed this handlebar riser with you in mind.
You can have style AND comfort on your 2008 & 2009 BMW R1200GS!
This handle bar adapter mimics the styling of the stock part, while bringing the bars 20 mm higher and 40 mm closer to the driver for considerable relief while maintaining the style. Thats about 1.76 inches of diagonal move!
The riser is silver anodized. It is not necessary to change the brake cable with this modification.
|
$239.99
Manufacturer: Verholen
Part Number: VER 4901-901229
|
|
|
BMW R1200GS & Adv, F650GS & F800GS Replacement Driver Footpegs, 40mm Drop
Are your knees telling you they need more leg room on your Bike?
Install these Replacement Driver Footpegs from Verholen and your legs will thank you!
This set of Replacement Driver Footpegs will sit 40mm lower (1.57 inches) than the stock pegs, giving your knees a much more relaxed position.
Works on R1200GS, 2008-2010 R1200GS Adventure, 2008 F650GS & F800GS
Remember!
Lowering footpegs means less room to lean the bike. That means, you can scrape your pegs. Since this kit is adjustable, you can find your own optimal position.
Manufactured in Germany by MV Verholen. Stock Image used. Actual product may vary slightly.
|
$189.99
Manufacturer: Verholen
Part Number: VER 4901-907607
|
|
|
BMW R1100GS R1150GS R1200GS Rocker Footpegs
Stand, sit, brake and shift with increased comfort and support!
Swap your stock footpegs for these Rocker Footpegs by Ilium Works.
Designed specifically for BMW R1100GS, R1150GS and R1200GS, these replacement footpegs rock for relaxed ankle alignment. They also drop your foot down ½" from the stock peg location. Each footpeg measures 2-1/4" wide by 5-1/4" long. The unique torsion bar system returns the peg to an adjustable neutral position.
|
$235.00
Manufacturer: Ilium Works
Part Number: IW 18-300
|
|
|
BMW R1200GS / ADV 2008 and up Bar Riser 2 inch move
Want maximum relief with minimum price?
These handlebar risers for the 2008 and later BMW R1200GS and Adventure from Ilium Works are for you.
Beautifully contoured, these Bar Backs bring your handlebars up and back for a total diagonal movement of approx. 2.00". This makes for a much more relaxed and comfortable riding position. Stock brake and clutch lines will work, but some adjustment will be required. CNC machined from 6061 billet aluminum, and powder coated. All stainless steel hardware is included in the kit.
Fits 2008 and later models only. Fits 28mm handle bars. Replaces the stock bar risers.
|
$89.99
Manufacturer: Ilium Works
Part Number: IW 18-800
|
|
|
BMW R1200GS 2004-2007 Bar Risers 2.22 inch move!
Need some relief while you're riding your R1200GS?
Make a big move with this kit from Verholen! Over 2 inches!
This handle bar riser brings the bar 40mm higher and 40mm closer to the driver for a diagonal move of about 2.22 inches!
Fits BMW R1200GS 2004-2007. Does not work with R1200GS Adventure with additional lamps because the screws don't fit. Finish is black anodized, hardware is included.
|
$179.99
Manufacturer: Verholen
Part Number: VER 4901-901310
|
|
|
BMW R1200GS 2004-2007 Bar Risers 1.875 inch Rise
Looking for a more relaxed riding position?
This handlebar riser kit from Moto-Techniques provides the relief you've been looking for!
This handlebar Riser set works on the BMW R1200GS model years 2004 to 2007 only. Brings the handlebars diagonally up 1.4 inch and back 1.25 inch to unload weight from your wrists & forearms and relax your neck. Uses stock control cables and hoses, but some adjustments to your cables may be required. New stainless steel bolts are supplied. Clear anodized for corrosion protection and matches stock finish. This a great Bar Riser Set at a GREAT price. Stock image used, actual product may vary slightly.
|
$79.95
Manufacturer: Moto Techniques
Part Number: MT 513-075
|
|
|
BMW R1200GS / ADV 2005-2007 Bar Riser 2.042 inch move
Be more comfortable riding your BMW R1200GS / Adventure...
Raise your handlebars and relax your body!
Manufactured by Ilium Works, these handlebar risers move your stock handlebars up 1.168 inch and back 1.675 inch for a total diagonal movement of 2.042 inches which makes for a much more relaxed and comfortable riding position.
Fits 28mm handle bars. Fits 2005-2007 models only of the BMW R1200GS and R1200GS Adventure. Stock brake and clutch lines will work, with some adjustments required. These Bar Backs are CNC machined from 6061 billet aluminum, powder coated black and come with all stainless steel hardware.
|
$79.99
Manufacturer: Ilium Works
Part Number: IW 18-100
|
|
|
BMW R1200GS / R / RT / RT-P / S / ST Highway Pegs
Stretch out your legs as you're riding down the highway on your R1200!
These Highway Pegs for your R1200GS / R / RT / RT-P / S / ST offer a superior design that provides you with a more comfortable riding position, a cleaner look and a more secure attachment.
• Adjustable Position - The peg can be moved 3 inches, so you can choose the placement that fits you best.
• Rocking Footpad - The large urethane foot pad rocks to accommodate different foot positions giving you a more comfortable riding position.
• Fold Away Design - the Highway pegs fold neatly under the head when not in use, preserving the uncluttered look of your BMW.
• Secure Mounting System - Bolts to the frame and crankcase, not the heads or valve covers.
|
$299.00
Manufacturer: Ilium Works
Part Number: IW 19-100
|
|
|
Mini Tank bag
Need a place to stow a few things, but still want them close at hand?
The Mini Tank Bag is like a glove box for your motorcycle!
This is an easy and practical storage solution for the small things that you want to take with you and keep readily accessible… cell phone, wallet, cigarettes, map, etc.
This bag works on many BMW's including the R1200RT, R1200R, R1200GS, R1100GS, R1100R, R1100RT, R1150RT, R1150R R1150GS to name a few.
|
$69.99
Part Number: VER 4901-10154
|
|
|
BMW R1200GS 05-09 & GSA 07-09 Rear Splash Guard Fender
REAR SPLASH GUARD for your BMW R1200GS 2005-2009, GSA 2007-2009
Protect you and your expensive rear shock from road debris such as rocks, mud and water spray. Made from durable hard poly black textured plastic that follows the natural contour of the motorcycle and enhances its sleek design. Will work with ESA. Easy installation with 2 replacement screws and 4 zip ties, included in kit.
Fits 2005 - 2009, R1200GS
and 2007 - 2009, R1200GS Adventure
NOTE: Some luggage racks may interfere with the installation of this product. Check location where the splash guard zip ties mount to the frame.
|
$54.99
Manufacturer: Ilium Works
Part Number: IW 05875-20
|
|
|
BMW R1200GS Front Fender Extender
Want to protect your bike from debris thrown up by the front tire?
The Extenda Fenda by Pyramid was designed with you in mind.
This cool fender extender mounts to the back of your front fender with self adhesive and screws included in the kit. It helps keep rider and bike cleaner, cuts down on paint damage on the lower fairing and also protects important parts of the bike such as the radiator and oil cooler.
(Installed Photo is a Stock Image, R1200GS not pictured)
|
$39.99
Manufacturer: Pyramid
Part Number: PYR 054160
|
|
|
BMW R1200GS 05-09 & GSA 07-09 Front Fender Extender
Front Fender Extension for your R1200GS. Extends the rear of your front fender by another 5 inches to protect you and your bike from road debris such as rocks, mud and water spray. Made from durable hard black textured plastic that follows the natural contour of the motorcycle and enhances its sleek design. Easy installation with 4 self tapping screws, included in kit.
Fits R1200GS 2005-2009 & R1200GS Adventure 2007-2009
|
$36.99
Manufacturer: Ilium Works
Part Number: IW 05860-20
|
|
|
BMW R1200S, R1200R, and 2007-2010 R1200GS Lift Handle
Having difficulty lifting your bike onto its center stand?
You need this retractable Lift Handle from Verholen!
Simply fold it out when needed... it locks into position and gives you a sturdy hand hold for lifting your bike. Then pop it out to unlock it and fold it back out of the way! Always accessible when you need it, and never in the way. Easy to install. Works on the BMW R1200S, R1200R, and 2007-2010 R1200GS.
|
$139.99
Manufacturer: Verholen
Part Number: VER 4901-10145
|
|
|
BMW R1200GS R1200RT R1200ST Cylinder Protection Guards
Cylinder protectors made from plastic may do their job when your motorcycle tips over or hits a soft surface, but what about gravel, asphalt, or when your bike goes down while driving? Can they stand up to the weight and force of the load during the duress of a skid?
In a minor event, you will need to replace your plastic cylinder protector each time it cracks or shatters. In a major event, when your plastic cylinder protector cracks or shatters, it won't be there to do its job: Protecting your very expensive Cylinder.
Cylinder protectors made from round pipe may perform their function better, but do you like the way they alter the appearance of your motorcycle, add to the weight and negatively affect the aerodynamics of your motorcycle? Are you prepared for the expensive installation which includes adding new installation points? And what about when they develop unsightly dents or scratches while doing their job?
The Solution: Protect your cylinder with these sleek Steel Plates, not Plastic or Pipe!
|
$219.99
Manufacturer: Verholen
Part Number: VER 4901-10159
|
|
|
BMW K1200S/R K1300S/R K1200GT 06+ R1200GS 08+ & R1200RT Front Rim Cover
Finish the look of the front hub on your BMW K1200S/R K1300S/R K1200GT 06+ R1200GS 08+ or R1200RT
This Front Wheel Hub Cover from MV Verholen fills in that vacant hole!
Each kit includes a swirl pattern cap for each side of the hub with MV Logo inserts and a threaded expansion holder to fasten them on the hub. Finish is Anodized Silver.
|
$89.99
Manufacturer: Verholen
Part Number: VER 4901-10157-V
|
|
|
BMW K1200S/R K1300S/R & R1200GS/RT/S/ST Rim Cover
Finish the look of the rear hub on your BMW K1200S/R K1300S/R & R1200GS/RT/S/ST
This Rear Wheel Hub Cover from MV Verholen fills in that vacant hole!
Each kit includes a BMW Logo insert, vented caps for each side of the hub and a threaded expansion holder to fasten them on the hub. The arrangement of the vents results in higher air flow, which helps with cooling.
Available in Polished Silver finigh, Anodized Silver finish, or Anodized Black finish.
|
$109.99
Manufacturer: Verholen
Part Number: VER 4901-10156/10157/10158
|
|
|
BMW R1100S, R1200GS to 2005, R1200R, R1200RT, and R1200ST Side Stand Block
Does your Motorcycle lean over too much when it's parked?
Add this Side Stand Block from Verholen, and you bike will be more upright in minutes.
Simply place the Side Stand Block on the bottom of your sidestand foot and use a hex wrench to tighten the bolt that's incorporated in the block.
|
$69.99
Manufacturer: Verholen
Part Number: VER 4901-1502
|
|
|
Ball Mount on 8mm Integrated Screw
Want to mount an accessory between your handlebars on your Motorcycle?
You need this ball mount from Verholen.
The piece is an M8 threaded screw 30mm in length, topped with a 25.4mm (1 inch) diameter ball. Simply remove one of the M8 screws attaching your handlebar clamp, and replace it with this ball mount. Now you have a great location to clamp your mount and attach your GPS, Radar, PDA, Cell or whatever??? Want to put it somewhere else? The ball mount can be attached anywhere you have an M8 screw on your motorcycle. Have more than one accessory to mount? Add multiple ball mounts to your motorcycle!
Designed around BMW motorcycles, but will work anywhere you have an M8 screw.
|
$64.99
Manufacturer: Verholen
Part Number: VER 4901-10186
|
|
|
BMW Motorcycle Oil Filter Wrench
Do you like to change your own oil? If so you need an oil filter wrench, and this is a cost effective option compared to some of the $70 + wrenches on the market.
Use this Oil Filter Wrench to easily remove and install oil filters on R1200GS, R1200R, R1200RT, R1200RT-P, R1200ST, K1200S, K1200R, F650, F650CS, F650GS, F800GS, F800S, F800ST, K1200S (‘06 OR LATER) or K1200GT (‘06 OR LATER). Can be used with either a 3/8” ratchet or 17mm wrench. This custom made oil filter wrench is CNC machined from 6061 aluminum and has a beautiful black anodized finish. Great gift idea for the “do it your self-ers”.
|
$32.95
Manufacturer: Ilium Works
Part Number: IW 10-500
|
|
|
BMW Motorcycle Shift Lever Extension
Want easier access to your shift lever?
This Shifter Extension will lenghten the shift lever by 3/4".
This shift extension can be used with your highway pegs. Easy installation, no drilling or modification required, simply push the shift extension on over the shift lever. The shift extension has barbs machined inside to securely hold it in place. (note: if your OEM shifter has excessive wear, you may need to replace the rubber first)
Made out of 6061 aluminum and then clear anodized, it works on many different BMW Motorcycles.
|
$19.95
Manufacturer: Ilium Works
Part Number: IW 10-300
|
|
|
BMW R1200GS 2009+ Side Stand Footplate Enlarger
Reduce the chance of a tip-over!
This Sidestand foot plate enlarger for the 2009+ BMW R1200GS increases the area of the foot plate to a little more than 4.5 X 2.875 inches to help prevent tip overs. The plate is made out of 6061 aluminum and steel, then powdercoated black. Screws are stainless steel.
Easy installation, simply bolt-on. No drilling or modifications required. Please verify the dimension of the sidestand foot plate on your bike prior to purchasing.
|
$32.95
Manufacturer: Ilium Works
Part Number: IW 18-250
|
|
|
BMW R1200GS Side Stand Footplate Enlarger
Reduce the chance of a tip-over!
This Sidestand foot plate enlarger for the 2006-2008 BMW R1200GS is a little more than 2.75" X 3.5" to help prevent tip overs. The plate is made out of 6061 aluminum and steel, then powdercoated black. Screws are stainless steel.
Easy installation, simple bolt-on. No drilling or modifications required. Does not fit bikes that have been factory lowered.
|
$32.95
Manufacturer: Ilium Works
Part Number: IW 18-200
|
|
|
90 Degree Valve Stem
90' Valve Stems makes adding air to your tires a snap!
Simply put it on when you need it, then take it off when you are done.
This part is only to be used when adding air to the tires. Never ride with the adapter installed.
|
$13.95
Part Number: CCC 951121
|
|
|
BMW to Cigarette Style Accessory Power Cord Converter 10"
Does your accessory have a cigarette style plug that doesn't fit in your BMW style accessory socket?
You need an Accessory Power Cord Converter!
This 10" Accessory Power Cord Adapter comes with a cigarette lighter type socket on one side and the BMW plug on the other. This is a great option to connect accessories and electrical devices, such as cell phone chargers, mini air compressors, heated clothing, GPS units, or anything else you have that uses a cigarette style plug.
|
$19.95
Manufacturer: Wire Works
Part Number: WW 10
|
|
